Optimize your bike's chain maintenance with MOTUL Chain Clean to improve its performance and extend its lifespan – in a completely environmentally friendly way.

Use:

Instructions for use MOTUL Chain Clean.

Preparation: Shake well before use. Standard use:

1. Spray the chain with MOTUL Chain Clean.

2. Leave for 5 minutes.

3. Rinse with water and dry with a soft cloth. If the chain is very dirty, clean it with a non-abrasive brush and spray again.

Easy cleaning:

1. Spray MOTUL Chain Clean on the chain, discs and the entire moving drive system.

2. Scrub with a brush.

3. Rinse with water and dry with a clean microfiber cloth.

Pro tip:

1. Remove the chain.

2. Immerse in a container of MOTUL Chain Clean.

3. Scrub with a brush if necessary.

4. Rinse with water, dry with a clean cloth and reinstall the chain.

Lubrication after cleaning: After cleaning, lubricate the chain with MOTUL Chain Lube Wet (for wet conditions) or MOTUL Chain Lube Dry (for dry conditions). To extend the life of the chain, repeat this procedure every 100 km. Safety: For safe use, read the safety data sheet (MSDS) and information on the packaging.