Nikwax Twin Tech Wash 1L Detergent

Nikwax Tech Wash® is a highly effective cleaner.

It also renews the existing durable water-repellent finish (DWR) and enhances breathability.

It is a safe way to thoroughly clean waterproof clothing and equipment.

Applying the product in a washing machine is quick and easy, ensuring that the entire garment is thoroughly cleaned.

It safely cleans, restores breathability and provides water-repellent properties.

Before washing with Tech Wash®, remove stubborn dirt with a sponge or nylon brush.

Remove all non-washable parts.

Shake well before use.

Follow the instructions on the label.

Directions for use:

1. Hand washing:

Rubber gloves are recommended when hand washing.

- Soak the garment in warm water in a bathtub or bowl.

- Add 3 full caps (150 ml) in medium/hard water or 2 full caps (100 ml) in soft water.

- Rinse three times in cold water until the water runs clear.

2. Machine washing:

- Remove any detergent residue from the dispenser.

- Place the garments in the washing machine; wash no more than 2 garments per cycle.

- Add 3 full caps (150 ml) in medium/hard water or 2 full caps (100 ml) in soft water.

- Follow the instructions on the garment manufacturer’s care label.

WARNING!!! Do not use any other detergents together with this product.

Capacity: 1L

Nikwax TX. Direct Wash-In 1L Wash-In Waterproofing

Nikwax waterproofing is an easy-to-use product for protecting washed garments.

Its easy-to-use, safe and highly effective formula makes it the best product of its kind on the market.

TX. Direct Wash-In is also ideal for waterproofing rainwear.

The product provides durable water repellency, refreshes garments and ensures excellent breathability.

The waterproofing can be easily used in a washing machine.

For the best results, wash the garments with Nikwax Tech Wash® in a separate wash cycle before waterproofing.

The garments do not need to be dried before waterproofing.

Directions for use:

1. Using a washing machine:

- Remove any detergent residue from the dispenser.

- Add 2 full caps (100 ml) of waterproofing to the washed garments.

- Set the “synthetics” wash cycle to 30º and a low spin speed.

To maintain the garment’s waterproof properties, wash it with Nikwax Tech Wash® before waterproofing.

2. Hand washing:

Rubber gloves must be worn when hand washing.

Soak 1 clean garment in 6 l of warm water in a bathtub or bowl.

Add 50 ml of TX.Direct® waterproofing.

The product should be thoroughly distributed in the water. Leave the garment to soak for 5 min. and stir again.

Rinse in cold water until the water runs clear.

WARNING!!! Do not use together with any other detergents.