R28 - PUNCHING BAG RING - DBX BUSHIDO

Chain ring for R28 punching bag

for bags with a diameter of 30 to 40 cm

Is your room too low and you need to shorten the chain length on your punching bag?
Or maybe you are annoyed by the effect of the bag tightening in its upper zone?
Using a ring on the bag chains will effectively solve your problem

By using a ring, you will not only increase the lifespan of the chains and the bag itself, but you will also get rid of the effect of the bag walls tightening in its upper zone, which not only spoils the visual effect but also reduces the training surface.

The ring has a diameter of 28 cm and is suitable for punching bags with a diameter of 30 to 40 cm.

The ring can be mounted at different chain heights, adapting the arrangement of the sweet tooths to your needs.

The ring has a screw connection so you can put it on and take it off yourself without interfering with the bag's chains.

Technical parameters of the R28 punching bag ring:

• diameter: approx. 28cm


• intended use: bags with a diameter of 30 - 40 cm


• material: steel

FAQ – frequently asked questions:

1. I have a bag with a diameter of 40 cm, should I use an R28 or R38 ring?

Both sizes will be correct.

2. Where should I install the ring?

The ring can be mounted at any chain height depending on the effect we want to achieve.

3. Will the bag chains not slip around in the ring?

The ring should be selected so that its diameter is several centimeters smaller than the bag's diameter, which will prevent the chains from slipping. Optionally, you can also use "U-bolts" to permanently connect the ring to the chains.

4. I can't put on the ring because the lazy links are too narrow.

In such a situation, it is recommended to expand/break the selected chain links to a width that allows the ring to be fitted.