Replacement remote control for round, blue remote controls. Without changing the radio system, the remote control will work with every device operated by this system.

The remote control must be programmed in the same way as the original remote control:
1. Press the selected button on the PIL0401 and hold it for 5–6 seconds.
2. Press the button on the working SMILO remote control three times at one-second intervals (hold the remote control button for one second, pause for one second, hold the remote control button for one second, etc.).
3. Then press the button on the PIL0401 for one second. The remote control will be operational after approximately 10 seconds.
Note: During programming, you must be within range of the receiver (close to the gate).

The remote control can also be programmed directly to the radio receiver. To do this, press the learn button on the radio receiver for 1 second, then press the selected button on the remote control for 3 seconds.