SAR is an antenna combiner/splitter constructed using a decoupling transformer. There is a DC path between the terminals
(WE/WY_1 / 2 / 3), enabling antenna amplifiers to be powered via a coaxial cable.
Attention! If only one of the antennas is supplying power to the amplifier, cut the jumper (Z1 or Z2) in the circuit
of the antenna without an amplifier.
Two operating modes available:
1. Combiner – combining the signal from two RTV antennas to one receiver.
2. Splitter – splitting the signal from one antenna to two RTV receivers.
Thank you for your trust and for choosing Barczak products. We are confident that they will meet your
expectations. We wish you good reception and satisfaction with the operation of the device.
Technical data:
Reception bands: UKW-FM, VHF, UHF
Channels: 1-60
Frequency range: 1 - 694 [MHz]
Matching, voltage standing wave ratio (VSWR): < 2,0
Attenuation: up to 4 dB
Number of terminals: 3
Connector type: terminals
Input impedance: 75[?]
Output impedance: 75[?]
Housing material: ABS
Mast mounting: cable tie