Flashing rear light with brake light function

With the BUSTER RL 150 rear bike light, no one will miss you! SIGMA's brightest rear light ensures maximum safety – 150 lumens and a visibility of 2,000 meters make cyclists perfectly visible both on the road and in the dark forest. The practical brake light function signals every braking action and provides additional safety in road traffic.

Five lighting modes allow the BUSTER RL 150 to illuminate for up to 20 hours in flashing mode. Tool-free installation, durability, compactness, and low weight make it the ideal rear light for even the most demanding users!

Key features

Versatility - five lighting modes

Cyclists can choose from five different lighting modes, allowing them to individually adjust the light intensity and thus the battery life. In High mode, the BUSTER RL 150 illuminates for up to 4 hours at 40 lumens, and in Low mode, for up to 20 hours at 5 lumens. Day Flash mode, with two pulsating red LEDs with 150 lumens, draws attention to the cyclist for over 6 hours. In Night Flashing mode, the USB rear light illuminates for up to 7 hours at 25 lumens. For longer rides, Eco Flash mode provides additional visibility and safety in traffic, with up to 20 hours of illumination.

Greater safety with a brake light

Thanks to its integrated acceleration sensor, the BUSTER RL 150 light immediately recognizes braking. Two LEDs then shine particularly brightly for approximately 3 seconds. A practical feature that increases safety – not only at night, but also during the day – in road traffic or during group rides.

Faster start thanks to the memory function

Thanks to the Memory function, the BUSTER RL 150's light turns on in the same mode it was in when it was turned off. This is a practical feature for anyone who wants to be ready to ride at any time.

Very good visibility

The BUSTER RL 150 light ensures cyclists are clearly visible from the side. It features side "windows" that give the rear light a 280-degree visibility area. This safety feature is especially important in city traffic.

Other features

Three-stage battery indicator

A quick press of the operating button and the BUSTER RL 150's three-stage battery charge indicator will show you how much power is left. This allows cyclists to switch to a more economical lighting mode when needed, ensuring they have enough power for the last meter of their route.

Double-click protection against accidental activation

The BUSTER RL 150 is activated by pressing the button twice. The large switch is easy to operate even with gloves on. This feature allows you to stow the rear light in a backpack or shirt pocket without worrying about it accidentally turning on.

Energy saving and great power

The BUSTER RL 150 is equipped with an integrated lithium-ion battery that charges via USB-C. The rear light is fully charged in up to three hours. This eliminates the hassle of replacing batteries, saves resources, and is environmentally friendly.

Tool-free assembly

Thanks to the silicone strap, the BUSTER RL 150 can be attached to seat posts up to 35 mm in diameter in seconds without the need for tools.

Water splash resistance

The BUSTER RL 150 lamp is splash-proof (IPX4 protection category) and is therefore suitable for use in wind and bad weather.

Characteristics

Visibility 2000 m

Brake light function with 2 LEDs

5 lighting modes: High, Low, Day Flashing, Night Flashing, Eco Flashing

Burn time: 4 h in High mode (40 lumens), 20 h in Low mode (5 lumens), 6 h in Day Flashing mode (150 lumens), up to 7 h in Night Flashing mode (25 lumens), 20 h in Eco Flashing mode (5 lumens)

Charging time: 3 hours

Tool-free installation with a silicone band

Built-in USB Type-C charging port

280-degree side visibility

3-stage battery charge level and charging indicator

Protection against accidental switching on (turn on by pressing the ON button twice)

Resistance to splashing water (IPX4 protection category)

Weight: 25 g