Set Tech-Protect Easy Set Foil & Glass Fit+ 4in1 is a comprehensive screen protection solution combining two types of protection in one package. The set includes 2 hydrogel films with an installation frame and 2 tempered glass protectors — enough for long-lasting device protection.

The Glass Fit+ tempered glass, 0.3 mm thick and rated 9H hardness, shields the display from scratches while maintaining full touchscreen sensitivity and crystal-clear clarity. The oleophobic coating effectively repels fingerprints and makes cleaning effortless.

The Hydro Flex+ hydrogel film, made from TPU, conforms perfectly to the screen surface, including curved edges. It features self-healing properties — minor scratches that occur during everyday use smooth out on their own. The film maintains full optical clarity and touch sensitivity.

* Due to the varying edge milling of displays, a subtle air halo may appear around the screen after installing a protective film or glass. This is a natural occurrence and depends on the specific edge milling of the individual unit.

• 100% Original
• Packed in original packaging
• Glass Fit+ tempered glass
• Hydro Flex+ hydrogel film
• Precise fit
• Full touchscreen sensitivity preserved
• Crystal clarity – true colour reproduction

2 × Tech-Protect Glass Fit+ tempered glass

2 × Tech-Protect Hydro Flex+ hydrogel film

1 × Film installation frame

2 × Installation kit

Tempered glass

1. Start the installation in the bathroom right after a shower – the steam will settle the dust in the air so it won't interfere with the process.

2. Thoroughly clean and degrease the screen surface, then polish it to a shine using a dry cloth.

3. Install the glass as evenly as possible – you can position it using the included installation tools.

4. Remove any air bubbles by firmly pressing down with circular motions for several dozen seconds – do this so that the adhesive layer bonds to the screen as strongly as possible.

Hydrogel film

1. Begin installation in the bathroom right after a shower – the steam will settle on any dust particles floating in the air, preventing them from interfering with the installation.

2. Place the phone into the special installation frame, making sure it is seated securely.

3. Thoroughly clean and degrease the screen surface using the included wipe, then polish it to a shine with a dry cloth. Make sure no dust particles or dirt remain on the screen.

4. Align the cutouts in the film with the pegs on the frame so that they fit together perfectly.

5. Pull the inner protective layer of the film from one side, pulling from the centre outward. This will initiate the automatic self-adhesion process of the film onto the screen.

6. Press the film down with the squeegee so that the adhesive layer bonds firmly with the screen surface.

7. Pull the inner protective layer from the other side, again pulling from the centre outward, then press it down with the squeegee so that the adhesive layer bonds evenly with the entire screen surface.

8. Gently remove the outer protective film.

9. If any air bubbles appear under the film, press firmly over the entire surface using circular motions for several dozen seconds until they disappear – this will ensure the adhesive layer bonds as strongly as possible with the screen.