Tempish Viber 80 roller skates 1000004610

TEMPISH Viber 80 roller skates

Properties:

• The TEMPISH VIBER 80 skates combine a hard freestyle boot with the speed of large 80mm wheels.
• A special universal model designed for both shorter city routes and, thanks to its large wheels, also for trails.
• This skate is suitable for advanced and experienced skaters.
• Hard frame roller skates are designed for universal use due to their design and equipment.
• Short skids ensure easy maneuverability.
• The skate is equipped with a combination of three 80 mm wheels, thanks to which you can achieve high speeds while riding.
• It is also possible to install smaller wheels (minimum recommended size 90mm).
• The skate's frame is well ventilated - ventilation reaches the foot thanks to the ventilated insole, which has holes around the entire perimeter, including the tongue.
• The roller joint uses a screw with a special nut and washer, thanks to which the cuff is replaceable and can be tightened as needed, which also guarantees a longer service life than a joint rivet.
• The upper self-locking metal buckle has a bend at the end for a better grip.
• The strap is attached to the frame so that it does not catch on the second skate during slalom and freestyle, and the buckle itself is protected from damage by a lower plastic tab.
• The instep strap is equipped with a single-stage micro buckle with a very comfortable tightening and loosening thanks to the ratchet system.
• The plastic protectors on the outside of the skates are replaceable, as is the instep strap.
• The lace eyelets are equipped with strong metal rings to protect the laces and provide a better fit.
• Thanks to the use of 10 mm wide waxed laces, it is possible to gradually tighten the laces and close the skate frame more effectively.
• The roller skate liner is ventilated, has holes around the entire circumference and is reinforced with PVC at the top.
• There is flexible neoprene around the toes for increased comfort.
• Loop with reflective strip on the back.
• Reflective elements are also located on the outside of the roller.
• In the area of the Achilles tendon, the liner is lowered and formed into a V-shape, which increases maneuverability and mobility, and thus makes it easier to perform tricks and freestyle moves.
• The lining has cutouts in the ankle joint area sewn with elastic neoprene, which allows for optimal anatomical placement of the shoes while maintaining its stiffness.
• The lower part of the lining uses a material that slides less on the skeleton.
• The shoe has a 3 mm thick anatomical insole that is comfortable enough, but not too soft.
• Under the insert in the heel part, there is a shock-absorbing silent block made of TPR material, which perfectly absorbs vibrations and shocks, is quite thick, soft and comfortable.
• The tongue of the insole is stiff and thick enough, it consists of 2 parts, thanks to which it perfectly reproduces the instep of the foot.
• The tongue holds its position well thanks to the use of a string.
• The skids made using CNC technology are highly reinforced with a three-dimensional structure, very strong, stable and precise.
• Attached to the shoe with 2 central screws and 2 solid aluminum threaded blocks.
• Thanks to these blocks, power transmission is much more efficient.
• The chassis can be adjusted laterally and longitudinally.
• The weight-saving hollow axles are 8mm in diameter and are mounted on the left roller on the inside and on the right roller on the outside to prevent the bolts from loosening while driving.

TECHNICAL PARAMETERS:

• Intended use: Sporty street (urban) and freestyle skating, for beginners, advanced and experienced skaters
• Skid CNC construction, additionally reinforced, one-piece, adjustable transversely and longitudinally.
• Wheelbase by size. 37-40: 235.5 mm, 41-46: 247.5 mm.
• Mounting screw diameter 165 mm
• Ring size 76 x 24mm for size: 37-40 80 x 24mm for size: 41-45
• Wheel hardness 85A
• 608 bearings, ABEC-9
• Lacing system Laces Type |
• Shoe shell: Synthetic Liner (inner sock): Thin nylon, absorbent microfiber
• Brake: None
• Top Clasp Buckle 45 Degree Clasp Buckle 8mm Axles
• Weight limit 100 kg