Tempish Viber 90 roller skates 1000069

Properties:

• TEMPISH Viber 90 Roller Skates Roller skates for experienced skaters combining a hard freestyle boot with a fitness frame.
• A special universal fitness hardboot model with 90 mm wheels, designed for both urban riding and advanced trail routes.
• The skate frame has very good ventilation, thanks to the liner with holes around the entire circumference, including the tongue.
• The strap is attached to the frame so that it does not catch on the second skate during slalom and freestyle, and the buckle itself is protected from damage by a plastic tab.
• The instep strap is equipped with a single-stage micro buckle with a very comfortable tightening and loosening thanks to the ratchet system.
• The plastic protectors on the outside of the skates are replaceable, as is the instep strap.
• The lace holes are equipped with strong metal rings that protect the laces and ensure a better fit.
• Thanks to the use of 10mm wide waxed laces, it is possible to gradually tighten the laces and close the skate frame more effectively. The toe area features flexible neoprene for increased comfort, and a reflective element has been added to the back and outer side of the skate.
• In the area of the Achilles tendon, the liner is lowered and formed into a V-shape, which increases maneuverability and mobility, and thus makes it easier to perform tricks and freestyle moves.
• The lining has cutouts in the ankle joint area sewn with elastic neoprene, which allows for optimal anatomical placement of the shoes while maintaining its stiffness.
• The lower part of the lining uses a material that slides less on the skeleton.
• The shoe has a 3 mm thick anatomical insole that is comfortable enough, but not too soft.
• Under the heel there is a shock-absorbing silent block made of TPR material, which perfectly absorbs vibrations and shocks.
• The tongue of the insole is stiff and thick enough, it consists of 2 parts, thanks to which it perfectly reproduces the instep of the foot.
• The tongue holds its position well thanks to the use of a string.
• The skids made using CNC technology are highly reinforced with a three-dimensional structure, very strong, stable and precise.
• They are attached to the boot using two central screws and two sturdy aluminum threaded blocks. These blocks significantly improve power transmission.
• The chassis can be adjusted laterally and longitudinally.
• The weight-saving hollow axles are 8mm in diameter and are mounted on the left roller on the inside and on the right roller on the outside to prevent the bolts from loosening while riding.

TECHNICAL PARAMETERS

• Intended use: Sporty street (urban) and freestyle skating, for beginners, advanced and experienced skaters
• Skid Made using CNC technology, additionally reinforced, one-piece, adjustable transversely and longitudinally.
• Wheelbase by size. 37-40: 235.5 mm, 41-46: 247.5 mm.
• Mounting screw diameter 165 mm
• Wheel size 90mm Wheel hardness 85A
• 608 bearings, ABEC-9
• Lacing system Laces Type |
• Shoe shell: Plastic
• Liner (inner sock) Thin nylon, absorbent microfiber
• Brake: None
• Top Clasp Buckle 45 Degree Clasp Buckle
• 8mm axles
• Weight limit 100 kg