----------
KEY FEATURES
----------
Operating frequency: 33 kHz
Single-pole and two-pole locating mode
NCV voltage identification function
ELV function
Ability to receive signals from up to 8 transmitters simultaneously
Receiver sensitivity adjustment – 9 levels
Backlit LCD displays
Built-in flashlight in the receiver
Transmitter power-off indicator

----------
TECHNICAL SPECIFICATIONS
----------
Voltage range identified by the transmitter: 8–480 V AC/DC
Voltage identification frequency: DC/AC 50–60 Hz
Voltage range identified by the NCV function: 80–1000 V AC, 50/60 Hz
Voltage measurement accuracy: 2.5% ± 3 digits
Overvoltage resistance: 480 V DC/AC
Measurement category: CAT III 480 V
Pollution degree: 2
Locating depth – single-pole mode: approx. 2.5 m (using a separate loop wire)
Locating depth – two-pole mode: approx. 0–0.5 m
Mains voltage identification depth: approx. 0–0.4 m
Transmitter power supply: 6 × 1.5 V AA (LR06)
Receiver power supply: 6 × 1.5 V AAA (LR03)
Transmitter current consumption: 165 mA
Receiver current consumption: approx. 30 mA / approx. 65 mA without backlight, max. 95 mA with backlight (discrepancy in the manual – to be confirmed)
Transmitter fuse: F 0.6 A 600 V
Number of signal codes: 8 (CODE 0–7)
Transmitter signal strength levels: 3
Signal strength indicator range: 0–999
Analog bar signal power range: 0–43
Display: segment LCD, semitransparent TN
Operating temperature: 0–40°C
Operating humidity: max. 80% RH, non-condensing
Storage temperature: -20–60°C
Storage humidity: max. 80% RH, non-condensing
Maximum operating altitude: 2000 m above sea level
Drop resistance: 1 m
Button lifespan: 10,000 cycles
Protection rating: IP54 (data from the product data sheet – not confirmed in the manual specification table)
Standards: EN IEC 61326-1, EN 61010-1, EN IEC 61010-2-033
Included: UT25CL-T transmitter, UT25CL-R receiver, dual test leads (red and black), crocodile clips (red and black), test probes with finger-tip ends (red and black), polarized AC plug lead, 1.5 V AA alkaline batteries (6 pcs.), 1.5 V AAA alkaline batteries (6 pcs.), user manual

----------
DIMENSIONS AND WEIGHT
----------
Transmitter dimensions: 189 × 96 × 48 mm
Receiver dimensions: 226 × 68 × 38 mm
Transmitter weight without batteries: approx. 389 g
Transmitter weight with batteries: approx. 528 g
Receiver weight without batteries: approx. 287 g
Receiver weight with batteries: approx. 354 g